Toshiba 242 All in One Printer User Manual


 
1 PREPARATION
36 Preparation 1 - Turning Power ON
Canceling conditions for energy saving mode
The energy saving mode is canceled under the following conditions. After the warm-up has been
completed, the equipment goes into the ready status.
Sleep mode
y When any of the [ENERGY SAVER] button, the [START] button and the function switching
buttons on the control panel is pressed
y When this equipment is connected to a PC with a USB cable
y When printing is performed from a PC connected with this equipment
y When the Weekly Timer reaches the time for the power to be turned ON
y When Fax data are received
y When the Platen Cover (optional) or the Automatic Document Feeder / Reversing Automatic
Document Feeder (optional) is raised
y When originals are placed on the Automatic Document Feeder / Reversing Automatic Docu-
ment Feeder (optional)
Super sleep mode
y When the [ENERGY SAVER] button on the control panel is pressed
y When Fax data are received
y When the Platen Cover (optional) or the Automatic Document Feeder / Reversing Automatic
Document Feeder (optional) is raised
If this equipment is connected to your PC with a USB cable, change the setting so that it does
not enter the super sleep mode.
P.132 “Energy Saving Mode Setting”