Toshiba 480 V Power Supply User Manual


 
57
G8000 Series Installation and Operation Manual
13.4 Normal Display
The Normal Display screen indicates the UPS operational status and provides various screens: an operation
guidance screens, mode screens and measured data screens. Table 13.3 shows these screens page by
page and illustrates the UPS Normal Display operational status screens.
TABLE 13.3 - NORMAL DISPLAY SCREEN EXAMPLES
OPERATIONAL STATUS SCREENS
BYPASS
Shows the UPS status at the top and guidance
message or measured data underneath.
Shows a guidance message at start up.
PRESS ‘RUN’ SWITCH
UPS SUPPLY
Shows the output voltage and current after start up.
AC-VO 480[V]
AC- I O 50[%]
OPERATION MODE
Shows the UPS Operation mode.
NORMAL OPERATION MODE
SYNC.
MEASUREMENT SCREENS
O/P VOLTAGE
Output Voltage: Shows the output line-to-line
output voltage.
VOLT. 480[V]
FREQ. 60.0[Hz]
O/P CURRENT (R.M.S.)
Output Current: Shows the RMS output current
(%) for each phase..
U 50[%]
V 50[%]
W 50[%]