Filter
Top Products
23
Hints & tips
Paper feed
In case of a paper jam, try to pull out the paper. If this
is not possible, press M, 74 and OK to eject the pa-
per.
If a document is not drawn in correctly by the automat-
ic feeder, press the button on the scanner cover and
open the scanner cover.
Press the small lever and carefully remove the docu-
ment.
Vertical stripes
If your e-STUDIO60F makes vertical stripes when cop-
ying, scanning or faxing, the scanner class might be
dirty.
Horizontal stripes
When your e-STUDIO60F makes horizontal stripes
when copying, scanning or faxing, the scanner might
be locked.
1 Open the printer cover.
2 Unlock the scanner with the lever on the underside
of the printer cover and close the machine.
The machine doesn’t print
If your e-STUDIO60F doesn’t print correctly, the reason
might be that the protective strips were not removed
completely from the printing cartridge.
Open the printer cover and remove the cartridges. Re-
move film residue, replace the cartridges and close the
machine.
Manual call
If sending a fax fails, you can check the line by using
the manual call function.
1 Insert a document.
2 Press M, 35 and OK. The built-in loudspeaker will
be turned on and you should hear the dial tone.
3 Dial the desired number and press Y. You will be
able to hear how the connection is established.
Before you call the technical service
If you can’t solve your problem with the proposals
above, please unplug your e-STUDIO60F from the
mains and reconnect it after a few minutes.
Change cartridges
The display will indicate if one of the cartridges is emp-
ty.
Please use only original TOSHIBA ink cartridges!
1 Open the machine by pulling the lever under the
control panel.
2 The position of the cartridge holder will show you
which cartridge needs to be replaced. The arrows
point to the cartridge that is empty: