Filter
Top Products
4 Replacement Procedures
4.17 Top Cover
Removing the Cover
To remove the top cover, first remove the battery pack, HDD, expansion memory module, ODD,
modem, wireless LAN unit, keyboard, and display assembly, and then disconnect the black LCD
power (LVDS) cable, Bluetooth cable, and wireless LAN cable from the system board, as
described in the preceding sections. Follow the steps below to remove the top cover.
1. Turn the computer upside down and remove the following 16 screws from the rear panel:
• M2.5X6: four screws (denoted by white arrows)
• M2.5X8: twelve screws (denoted by black arrows)
Figure 4-50 Removing the top cover (back panel screws)
Satellite A130/ A135 Maintenance Manual 4-45