Toshiba A130 Personal Computer User Manual


 
4 Replacement Procedures
3. Gently lift the Bluetooth module.
Figure 4-64 Removing the Bluetooth module
4. Separate the FFC cable from the Bluetooth module.
Figure 4-65 Removing the Bluetooth module cable
Installing the Bluetooth Module
To install the Bluetooth module, follow the steps below and refer to the figures in the preceding
section.
1. Secure the module to the system board using one black M2x3 screw.
2. Connect the FFC cable to the module to connect to the system board.
3. Connect the Bluetooth connector (brown) to the module after replacing the top cover.
Satellite A130/ A135 Maintenance Manual 4-55