Filter
Top Products
User’s Manual 7-7
HW Setup and Passwords
HDD Priority Options
If more than one HDD is installed in the computer, this option lets you set
the priority for HDD detection. If the first detected HDD has a boot
command, the system will boot from the HDD.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
[PXE]Sets PXE as the protocol. (Default)
[RPL]Sets RPL as the protocol.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
LAN
Built-in LAN
This feature enables or disables the Built-in LAN.
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the USB KB/Mouse Legacy Emulation
item to Enabled.
Built-in HDD −>
PC Card(Default)
HDDs are searched for a boot command in the
following order: the built-in HDD, and the PC
card. (Default)
PC Card −> Built-
in HDD
HDDs are searched for a boot command in the
following order: the built-in HDD and the PC card.
If a boot command is not found on the first detected HDD, the system will
not boot from the other HDD. It will search the next device in the boot
priority for a boot command.
Enabled Enables the Wake-up on Keyboard.
Disabled Disables the Wake-up on Keyboard. (Default)
Enabled Enables Built-in LAN functions. (Default)
Disabled Disables Built-in LAN functions.