Filter
Top Products
64
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
Sample using a Phillips-head screwdriver to remove the
memory cover
3 Remove the screw that holds the memory cover in place,
and remove the memory cover.
4 Remove the new memory module from its antistatic
packaging.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector (on the side you insert into the
computer).
5 Insert the memory module in the slot. Align the module
and gently press the module down into place.