Filter
Top Products
4.1 General 4 Replacement Procedures
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual 4-15
Removing the MDC Card
Remove the MDC Card (Modem Daughter Card) according to the following procedures and
Figures 4-6 and 4-7, after checking that the computer is turned off in boot mode.
CAUTION: Remove the MDC card after turning off the computer. If this is violated, the
computer or MDC card can be damaged.
1. Turn the computer upside down.
2. Release the M2.5x4 black bind screws.
3. Remove the MDC cover.
CAUTION: Do not touch the connectors on the MDC card or in the computer.
Contaminated connectors can cause MDC card failures.
M2.5x4 black bind screw
MDC cover
Figure 4-6 Removing the MDC cover