Filter
Top Products
4 Replacement Procedures 4.4 Switch Cover and Hotkey board
4-24 Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual
M2.5x4 black flat-head screw
Hotkey board
CN2001
SUMI-card
Figure 4-14 Removing the hotkey board
Installing the Switch Cover and Hotkey Board
Install the switch cover and hotkey board according to the following procedures and Figures 4-13,
4-14.
1. Connect the SUMI-card to CN2000 on the hotkey board.
2. Place the hotkey board in the correct position.
3. Secure the hotkey board with the two M2.5x4 black flat-head screws.
4. Place the switch cover in the correct position and fasten the following 11 latches, in that
order:
- Six bottom latches
- One latch on the left and right sides
- Three front latch