Filter
Top Products
4 Replacement Procedures
4.6 Optical Drive
This computer may be fitted with a: CD-RW/DVD-ROM device
DVD+-R/+-RW
DVD Super Multi device
Disassembling the Optical Drive
To disassemble the optical drive, then follow the steps below.
1.
Remove one M2.5x5 screw and slide the optical drive module from the bay. (Refer 4.5
Optical Drive Module)
2. Remove two M2x3 screws from the bracket plate. Remove the bracket plate.
M2x3
Figure 4-9 Removing the optical drive bracket
Reassembling the Optical Drive
To reassemble an optical drive, follow the steps below and refer to the figure in the preceding
section.
1. Position the optical drive bracket plate to the rear panel of optical drive.
2. Secure the optical drive bracket plate with two black M2×3 screws.
3. Install the optical drive module into the bay and secure with one M2.5x5 screw. (Refer 4.5
Optical Drive Module)
Satellite A80 /A85 Series Maintenance Manual
[CONFIDENTIAL]
4-15