Filter
Top Products
4 Replacement Procedures
Figure 4-19 Disconnecting the keyboard cable
Installing the Keyboard
To install the keyboard, follow the steps below and refer to the figures in the preceding section.
1. Connect the keyboard cable to the system board.
2. Set the keyboard in place and secure it with two black M2.5x3 screws.
3. Engage the flip latch with either a screwdriver or a fingernail.
4. Set the strip cover and press down to secure the strip cover latches engage.
Satellite A80 /A85 Series Maintenance Manual
[CONFIDENTIAL]
4-25