Filter
Top Products
2-2
2. SPECIFICATIONS
EO1-33019
2.3 PAPER (LABEL) SPECIFICATIONS
2.3 PAPER (LABEL) SPECIFICATIONS
NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper
and ribbons.
2. For further information about paper and ribbon, refer to Section 10. CARE/HANDLING OF THE
PAPER AND RIBBON.
Type Spool type
Width 60 mm ~ 110 mm
Length (270 m)
Outer diameter Ø65 mm (max.)
2.4 RIBBON SPECIFICATIONS
2.5 OPTION
[Unit: mm]
Span of one label
Label length
Width including backing paper
Label width
Gap length
Black mark length
Effective print width
Effective print length
Print speed up/slow down area
Outer roll diameter
Thickness (Backing paper + label)
Thickness of backing paper
Label dispensing mode
Item
Batch mode
Strip mode Cut mode
25.4 ~ 999.0
23.4 ~ 997.0
25.4 ~ 110.0
20.0 ~ 107.0
2.0 ~ 20.0
2.0 ~ 10.0
10.0 ~ 103.6
21.4 ~ 200.0
1.0
MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2)
0.13 ~ 0.17
0.056 ~
2.0 ~ 20.0
3.0 ~ 200.0
6.0 ~ 20.0
29.0 ~ 200.0
0.1 ~ 0.17
0.1 ~ 0.17
7.0 ~ 999.0
5.0 ~ 997.0
37.0 ~ 999.0
31.0 ~ 993.0
NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC represen-
tative or TOSHIBA TEC Head Quarter.
Description
A stop-and-cut rotary cutter
This module strips the label from the backing paper with
the take-up block and strip block.
This module is an external intelligent keyboard unit.
Option Name
Cutter module
Strip module
Keyboard module
Type
B-7204-QM
B-7904-H-QM
KB-80-QM