Filter
Top Products
2-2
2. SPECIFICATIONS
EO1-33006
2.3 PAPER (LABEL/TAG) SPECIFICATIONS
2.3 PAPER (LABEL/TAG) SPECIFICATIONS
NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper and
ribbons.
2. For further information about paper and ribbon, refer to Section 10. CARE/HANDLING OF THE PAPER
AND RIBBON.
Type Spool type
Width 60 mm ~ 110 mm
Length (300 m)
Outer diameter Ø65 mm (max.)
2.4 RIBBON SPECIFICATINS
Description
A stop-and-cut rotary cutter
This module strips the label from the backing paper with the
take-up block and strip block.
This module is an external intelligent keyboard unit.
Installing this board in the printer allows a connection with
an external device with the exclusive interface, such as the
keyboard module.
Installing this board in the printer allows parallel connec-
tion from the PC via the Centronics interface.
A 1MB flash memory which stores trun type fonts and
writable characters.
Option Name
Cutter module
Strip module
Keyboard module
Expansion I/O inter-
face board
Centronics interface
board
Expansion memory
board (1M byte)
Type
B-7204-QM
B-7904-H-QM
KB-80-QM
B-7704-IO-QM
B-7704-C-QM
B-7804-E1M-
QM
2.5 OPTION
[Unit: mm]
Span of one label/tag
Label length
Width including backing paper
Label width
Gap length
Black mark length (Tag paper)
Effective print width
Effective print length
Print speed up/slow down area
Black mark length (Label)
Outer roll diameter
Thickness
Label dispensing mode
Item
Batch mode
Strip mode Cut mode
25.4 ~ 999.0
23.4 ~ 997.0
25.4 ~ 114.0
22.4 ~ 111.0
2.0 ~ 20.0
2.0 ~ 20.0
10.0 ~ 105.7
15.0 ~ 500.0
15.0 ~ 500.0
1.0
MIN. 2.0
MAX. ø150 (Paper Core ø38, 40, 42 or 76.2)
0.13 ~ 0.17
2.0 ~ 20.0
6.0 ~ 20.0
Label
Tag
0.1 ~ 0.17
0.1 ~ 0.17
15.0 ~ 999.0
13.0 ~ 997.0
Label: 37.0 ~ 999.0
Tag: 25.4 ~ 999.0
31.0 ~ 993.0