Filter
Top Products
1. PRODUCT OVERVIEW
ENGLISH VERSION EO1-33035
1.1 Introduction
E1- 1
1. PRODUCT OVERVIEW
1.1 Introduction
1.2 Features
1.3 Unpacking
1.4 Accessories
Thank you for choosing the TEC B-SV4D series barcode printer. This
Owner’s Manual contains valuable information from general set-up to
confirming the printer's operation using test prints. You should read it
carefully to help you gain maximum performance and life from your
printer. This manual should be kept close at hand for everyday reference.
Please contact your TOSHIBA TEC representative for further
information concerning this manual.
This printer has the following features:
•
This printer is equipped with a 32-bit RISC processor, which offers up
to 5 inches/sec. print speed.
•
A standard USB interface for convenient label printing connectivity.
•
The clamshell design and moveable media sensor enable easy media
loading and use of a wide range of media.
•
All frequently used bar code formats are available in this printer.
Fonts and bar codes can be printed in any rotation.
•
This printer provides a choice of six different type faces of
alphanumeric font, and outline font printing capability.
•
The GS type is designed for batch issue and the GC type is for cut
issue. Fitting the optional cutter unit to the GS type enables cut issue.
•
This is the most cost-effective and high performance printer in this
class.
Unpack the printer as per the Unpacking Instructions supplied with the
printer.
When unpacking the printer, please check that the following accessories
are supplied with the printer.
CD-ROM (1 copy)
(Doc./No.: FMYC0005601)
NOTES:
1. Check for damage or
scratches on the printer.
However, please note that
TOSHIBA TEC shall have no
liability for any damage of
any kind sustained during
transportation of the product.
2. Keep the cartons and pads
for future transportation of
the printer.
Power Adapter
(P/No.: FMYC0002901)