Toshiba B-SX600 SERIES Barcode Reader User Manual


 
8. OPERATION PANEL
8- 2
8.2 Messages Displayed on the Operation Panel
Messages Printer status
Ready The printer is ready to print.
Pause (Number of labels issued.) The printer is in a pause state.
Pause (Head unit lifted.) The printer is in a pause state, and the Upper Unit
is lifted.
Pause (Front cover open.) The printer is in a pause state, and the Front Cover
is opened.
Pause (Side cover open.) The printer is in a pause state, and the Side Cover
is opened.
Printing Printing is being performed.
Take off the label. When the model with the Peel-off Unit is used, a
peeled label is still not removed from the media
outlet.
Error The printer is in an error state.
Low Power Mode The printer is in Low Power Mode.
1. Display when “Ready” is shown
When the printer is in a normal state
Display in the event of a warning
Powe
r
Read
y
Erro
r
Data
Ready
Bad thermal head.
No. 00000
Ready
Powe
r
Read
y
Erro
r
Data
No. 00000
The printer status is shown.
The number of labels printed is shown.
The cumulative number of printed labels is
shown after the printer is turned on.
It is cleared when the printer is turned off.
(It can also be cleared from the Menu.)
A warning message appears.
(e.g. “Bad thermal head”, “Paper near end”)
A buzzer sounds in the event of a warning,
and the Error LED flashes.
(The buzzer stops sounding either after a lapse
of a buzzer sounding time specified on the
Menu or by pressing any of the buttons on the
Operation Panel.)