Filter
Top Products
54
- TCP/IP CONFIGURATION
This section describes the pro-
cedures to configure the TCP/
IP for the Network Interface
Card to connect to the Internet.
Press:
+
+
+
+
Display the TCP/IP
Menu
1
Display the
BOOTP/DHCP Menu
2
BOOTP/DHCP
1.ON
2.OFF
01.DONE
02.BOOTP/DHCP
03.IP ADDRESS
04.SUBNET MASK ↓
05.DEFAULT GATEWAY
06.HOST NAME
Press:
+
Select the BootP/
DHCP Mode
3
OPERATION COMPLETED
Enable or Disable the BootP/
DHCP function.
(for ON-Enable)
(for OFF-Disable)
Displayed for 2 seconds
The display returns to Step 1.
Continue to set another item, or
press
+ to select
“1.DONE” to exit the Menu Op-
eration mode and return to the
Standby Mode.
When “1.DONE” is selected,
the Network Interface Card
starts initializing. Wait for few
minutes until the Network Inter-
face Card completes initializ-
ing.
BootP/DHCP Setting