Toshiba e-STUDIO25 Network Card User Manual


 
8
Press ENTER
Windows 2000/XP
Start a command prompt:
Click “Start, Programs, Accessories, Command Prompt”
Type:
TELNET 127.0.0.1 25
Press ENTER
If there is no SMTP server running you should see a message box saying something like:
Could not open a connection to 127.0.0.1
This is good, there is no existing SMTP server running on the PC. The Network
Viewer/ImageVision2000/SmartLink2000 device driver should be able to set up its SMTP server
without conflicting with an existing SMTP server.
If there is already an SMTP server running on this PC you should see something like:
220 somwhere.com NTMail (v6.04.0010/NT9682.00.22282d95) ready for ESMTP transfer
This is not good, there is an existing SMTP server running on the PC. You will not be able to start the
device driver on this PC without first closing whatever SMTP server is already running. The wording of
the “220” message may give you a clue about what is running the SMTP server so you can find it and
close it.
Type “QUIT” and press ENTER to exit TELNET.
After installing Network Viewer/ImageVision2000/SmartLink2000 and while the
software is running
At the Network Viewer/ImageVision2000/SmartLink2000 PC…
Windows 95(OSR2)/98/Me/NT4:
Click “Start, Run”
Type:
TELNET 127.0.0.1 25
Press ENTER
Windows 2000/XP
Start a command prompt:
Click “Start, Programs, Accessories, Command Prompt”
Type:
TELNET 127.0.0.1 25
Press ENTER
You should now see a line that says:
220 Unimessage ESMTP server ready for transfer.
This is good and indicates that the Network Viewer/ImageVision2000/SmartLink2000 SMTP server is
listening correctly.