Filter
Top Products
4.EDITING FUNCTIONS
Tab Paper 123
4 EDITING FUNCTIONS
TAB EXTENSION
Set the tab width and shift width of tab paper. These must be set before performing [COPY ON TAB], [BLANK TAB
INSERT] or [COPIED TAB INSERT].
1
Press [TAB PAPER] on the EDIT menu.
2
Press [TAB EXTENSION].
3
Adjust the tab width and shift width.
1) Press [DRAWER] for setting tab paper in the drawer or [BYPASS FEED] for setting it on the bypass tray.
2) Press [TAB EXTENSION] to adjust the tab width using or .
3) Press [SHIFT MARGIN] to adjust the shift width using or .
4) Press [OK].
Though the initial value is set to 13 mm (0.5") for both the tab width and shift width, this can be changed. For
details, refer to the MFP Management Guide.