Filter
Top Products
3 BASIC COPY MODES
70 Selecting Finishing Mode
Inserter mode
You can add a cover sheet previously created or insert a color page at a specified position using the Inserter (optional).
Also, you can set paper on the Inserter to only have sheets stapled, hole-punched and stitched without making copies.
This section explains how to set paper on the Inserter, how to only staple, hole-punch and stitch sheets without performing
copying. See the following page for how to insert a cover sheet and a color page at a specified position.
P.130 “Inserter”
Placing paper on the Inserter
The following paper can be set on the Inserter.
*1 Note that some types of paper may not be applicable for the Inserter due to their paper qualities, even if you are using the paper listed above.
*2 Contact a Toshiba-product distributor for details of the special paper available.
There are some restrictions for stapling or saddle stitching the paper set on the Inserter. See the following pages for
details.
y Stapling: P.66 “Maximum number of sheets available for stapling”
y Saddle Stitching: P.67 “Magazine sort / Saddle stitch”
Paper size A3, A4, A4-R, B4, B5, FOLIO, LD, LG, LT, LT-R, COMP
Media type
*1
Plain paper: 64 - 80 g/m
2
(17 - 20 lb. Bond)
Thick paper: 81 - 256 g/m
2
(21 lb. Bond - 140 lb. Index)
Recycled paper
Special paper (e.g. OHP film, color paper)
*2
Maximum number of sheets
can be set
64 - 80 g/m
2
(17 - 20 lb. Bond): 100 sheets
81 - 256 g/m
2
(21 lb. Bond - 140 lb. Index): Less than 12 mm (0.47") in paper height (less than 7
mm (0.28") in case of special paper)
1
Place paper on the Inserter tray with its face up. Align
the side guides with the paper width.
The start lamp of the Inserter lights.
y Be sure that the height of the paper placed on the Inserter does
not exceed the line indicated on the side guide.
y Sheets of different sizes cannot be set together.
y Match the size and direction of the paper to be set on the
Inserter with those of the original or paper in the paper source.
If the paper size is large, extend the tray.