Filter
Top Products
6 PRINTING LISTS AND REPORTS
126 Automatically Printing Lists & Reports
Automatically Printing Lists & Reports
Automatically printing lists & reports
Reports are automatically output if the conditions in the setting of the lists & reports output (
P.127 “Setting the lists and reports output”) are satisfied.
* Lists and reports are printed on LT/A4-size paper.
If LT/A4-size paper has run out, lists and reports will be printed on larger sized paper.
y Transmission journal:
Printed after every 40 (or 120) transmissions.
y Reception journal:
Printed after every 40 (or 120) receptions.
y Memory transmission report
After memory transmission has ended, this report is output. The reduced transmission docu-
ment can be added by using “PRINT 1st PAGE IMAGE?”.
y Direct transmission report:
After direct transmission has ended, this report is output.
y Multi transmission report:
After multi-address transmission has ended, this report is output. The reduced transmission
document can be added by using “PRINT 1st PAGE IMAGE?”.
y Polling report:
After multi-polling RX has ended, this report is output.
y Relay transmission originator terminal report:
When this equipment is setup as a relay originator, a status report concerning the initial
transmission to the relay stations is output. The reduced transmission document can be
added by using “PRINT 1st PAGE IMAGE?”.
y Relay transmission relay station report:
When this equipment is setup as a relay station, a status report of the transmission to the
relay destinations is output. The reduced transmission document can be added by using
“PRINT 1st PAGE IMAGE?”
y Relay transmission end terminal report:
When this equipment is setup as a relay station, a report providing the final outcome of the
relay transmission is transmitted to the relay originator. The reduced transmission document
can be added by using “PRINT 1st PAGE IMAGE?”
y Mailbox reception report:
Printed when an original is received in a confidential or bulletin board.
y Relay station report:
Printed when an original is received in a relay mailbox.
y Power failure list:
The list of the jobs which were erased will be output if there is something wrong with the con-
tents of the image memory when the main power switch is turned ON after a power failure
during Fax communication.