Filter
Top Products
2 SENDING A FAX
30 About Originals
Setting originals
When setting originals on the glass
Originals are sent in the order they are placed on the original glass in both memory TX and
direct TX modes.
3
Lower the Original Cover (optional) or the Reversing Automatic
Document Feeder (optional) slowly.
1
Raise the Original Cover (optional) or
the Reversing Automatic Document
Feeder (optional), and place the orig-
inal A with its face down on the
glass.
y Raise it 60 degrees or more to detect the
original.
2
Align the original against the left
inner corner of the glass.
y Different size originals can also be sent in
one transmission.
y When LD, LG, LT-R, ST, COMP, A3, A4-R,
A5, B4, B5 or FOLIO originals are placed as
shown in the figure on the right, the pre-
entered sender information is printed in the
shaded position shown B in the figure and
sent to the remote Fax.
y Entering the sender information ( P.154
“Registering the Terminal ID”)
y When transmitting non-standard-sized origi-
nals, best results are obtained by placing the
originals horizontally on the glass.
y When LT, ST-R, A4, A5-R or B5-R originals
are placed as shown in the figure on the
right, the pre-entered sender information is
printed in the shaded position shown C in the
figure and sent to the remote Fax.
A
B
C