Filter
Top Products
Sending Originals 51
Sending Originals
Direct transmission
In the direct transmission mode, the remote Fax is immediately dialed, and the originals are sent
after a successful connection with the remote Fax that has been completed.
y Users can check immediately if the original has been sent to the remote Fax.
y Once scanned, the originals are not stored in the memory.
y Users can specify only one remote Fax at one time.
y After a page has been sent, the next page is scanned. It takes longer to scan all pages.
y If an original is placed on the original glass, only one page can be sent.
* Memory transmission is set as the initial setting. Changing the initial setting to direct transmission
( P.152 “Setting the Initial Transmission Mode”)
Direct transmission by optional setting
1
Place the original(s).
y P.30 “Setting originals”
2
Press the [FAX] button on the control panel.
3
Press the [ADDRESS] button to enter the address menu, and then
press the [OPTION] button.
4
Press the [DIRECT TX] button, set the other transmission condi-
tions, then press the [ENTER] button.
y P.33 “Setting the Transmission Conditions”