Filter
Top Products
1.SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode 25
1 SETTING UP WIRELESS NETWORK
9
Specify the following items and press the [NEXT].
y ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the communication between Access Point and this equipment.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message
integrity check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that
the U.S. government improves to replace the DES and 3DES.
When WPA or WPA2 is selected for the security mode, only [TKIP] or [AES(CCMP)] can be selected.
The encryption intensity between each encryption is:
AES(CCMP) > TKIP
10
Specify the following items and press the [NEXT].
y TRANSMIT POWER
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
y TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have to specify the fixed rate, select
[AUTO]. When [AUTO] is selected, this equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you select a static transmit rate.