Filter
Top Products
1 SETTING UP WIRELESS NETWORK
42 Setting up the Ad Hoc Mode
Select security mode
After specifying the SSID, you must select the security mode for your wireless network.
The procedure to configure the security mode varies depending on the security mode that you select.
P.42 “Selecting WEP security mode”
P.44 “Selecting no security mode”
y If the Ad Hoc Mode, only WEP or NONE can be selected for the security mode.
y If you are not sure what security mode to select, see the following section to determine the security mode.
P.13 “Determine the security mode”
Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point and other wireless devices.
1
Press the [WEP] and press the [NEXT].
The WIRELESS ENCRYPTION - WEP screen is displayed.
2
Enter the following items and press the [NEXT].
y WEP ENCRYPTION
Select the bit length of the WEP key.
y KEY ENTRY METHOD
Select the character code for the WEP key.
y [WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and Key Entry Method.
When pressing the [WEP KEY button, the letter entry screen is displayed. Enter the value using the keyboard
and digital keys, and press the [OK] to set the entry.
64 bit 128 bit 152 bit
HEX: 10 26 32
ASCII: 5 13 16