Filter
Top Products
1.SETTING UP WIRELESS NETWORK
Setting up the Ad Hoc Mode 43
1 SETTING UP WIRELESS NETWORK
3
Select the transmit power and press the [NEXT].
Select the low transmit power if you want to limit the area that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
4
Confirm the settings and press the [FINISH].
The shutdown screen is displayed.
If you want to change the settings, press the [PREV] to move back to the screen that you want to change and
then repeat the operation.
5
Press the [YES] to shutdown the equipment.
The wireless settings apply after restarting the equipment.