Filter
Top Products
1.SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode 31
1 SETTING UP WIRELESS NETWORK
Selecting WPAPSK/WPA2PSK security mode
The WPAPSK/WPA2PSK is an authentication method using the PSK (Pre-Shared Key) between the Access Point and
other wireless devices.
To access the wireless network using the WPAPSK/WPA2PSK authentication, the same PSK Path Phrase must be
assigned in both the Access Point and other wireless devices. If the PSKs are same between the Access Point and other
wireless devices, the Access Point allows them to access the wireless network through the Access Point.
1
Press the [WPAPSK] or [WPA2PSK] and press the [NEXT].
The WIRELESS ENCRYPTION WPA-PSK screen is displayed.
2
Enter the following items and press the [NEXT].
y WIRELESS ENCRYPTION TYPE
Select the encryption type for the PSK.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key for per packet with a message
integrity check. This key will be changed for every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-generation cryptography algorithm that
the U.S. government improves to replace the DES and 3DES.
y [PSK PASS PHRASE]
Press this to enter the PSK Pass Phrase. The PSK is created by using the this pass phrase. You must enter the
same pass phrase that is set in the Access Point. The PSK Pass Phrase must be between 8 to 63 characters long.
When pressing the [PSK PASS PHRASE], the letter entry screen is displayed. Enter the value using the
keyboard and digital keys, and press the [OK] to set the entry.