Filter
Top Products
KK-1600 DISASSEMBLY AND REPLACEMENT 6 - 4 October 2000 © TOSHIBA TEC
[H] STP base stay assembly
1. Remove stapler. (See Fig. 6-4 to 6-7)
2. Detach STP bottom cover R. (See Fig. 6-9)
3. Detach AC adapter jack and the connectors
from STP controller PWA (J1/J2/J5).
4. Release 4 clamps.
Fig. 6-16
STP controller PWA
J2
J1
J5
AC adapter jack
323
[G] STP LED PWA
1. Remove stapler. (See Fig. 6-4 to 6-7)
2. Detach STP bottom cover R. (See Fig. 6-9)
3. Remove AC adapter. (See Fig. 6-13)
4. Detach one connector from STP controller PWA
(J5) and release 2 clamps.
Fig. 6-14
5. Remove one screw and remove STP LED PWA.
Fig. 6-15
STP controller PWA
connector
clamp
J5
Screw
STP LED PWA
322-2
322-3
Fig. 6-13
Power cord
AC adapter
AC adapter jack
322-1
[F] AC adapter
1. Remove stapler. (See Fig. 6-4 to 6-7)
2. Detach STP bottom cover R. (See Fig. 6-9)
3. Detach AC adapter jack from STP controller
PWA (J1).
4. Detach power cord and remove AC adapter.