Filter
Top Products
Chapter 4 Replacement Procedures
Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)
4-35
Installing the Top cover assembly
The following describes the procedure for installing the Top cover assembly.
1. Install the Top cover assembly to the Base cover assembly.
NOTE: Be careful not to catch the cables between Top cover assembly and Base
assembly.
2. Connect the touch pad cable/BT cable/Speaker cable/ power cable to the connector
on the mother board.
3. Secure the Top cover assembly with the following screws from the back and bottom
of computer.
M2.05.0 FLAT BIND screw Back x5
M2.0X3.0 FLAT BIND screw Back x2
M2-0.42 FLAT BIND screw Back x3
M2.03 FLAT BIND screw Back x3
M2.05.0 FLAT BIND screw Back x11
4. Free the cable from cable-drain when through the antenna cable to PCB hole.
5. Installing ODD and securing the screws on ODD Bezel and memory slot cover.