Filter
Top Products
59
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
You need a standard Phillips no. 1 screwdriver to install a
memory module.
To avoid damaging the computer’s screws, use a standard
Phillips no. 1 screwdriver that is in good condition.
The computer has two memory module slots—Slot A and
Slot
B. You can install one or two memory modules.
If you are adding memory after you have started to use the
computer, begin at step
1, otherwise skip to step 2.
1 Turn off the computer via the Start menu.
See “Using the Turn off computer or Shut down command”
on page 100.
The operating system turns off the computer.
2 Unplug and remove any cables connected to the
computer.
3 Close the display panel and turn the computer upside
down to locate the expansion memory module slot cover.
Sample base of a Satellite M30X/M35X series computer
Expansion memory
module slot cover