Filter
Top Products
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR
EO1-11095
6-1
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR
REG
X
SET
MGR
-
Z
(1) (4) (5) (6) (8)(2) (3) (7)
1
2
3
4
5
REG
X
SET
MGR
-
Z
6. OUTLINE OF PREPARATION PROCEDURE BEFORE
OPERATING THE ECR
This chapter shows the outline of set-up procedure of the ECR before actually starting the ECR operation.
WARNING!
Turn the POWER SWITCH to OFF before connecting the power cord.
Remove the cash register from the carton, referring to Chapter “2.
Unpacking”. And take out all the parts and accessories.
Remove the tapes and seals for holding parts or protecting the
register surfaces.
Plug the power cord of the register into a wall outlet. Make sure
that the outlet voltage matches that of the power required for the
register.
Insert the REG key into the Control Lock.
Turn the Mode Lock to the REG position with the power ON.