Filter
Top Products
4. PROGRAMMING OPERATIONS
EO1-11149
4.20 Manager Pass Code Programming (Submode 39)
4-30
Example) To program the following amount to each key.
[+] key
Preset Amount: 0.50
HALO: 3 digits
Tax Status: Non-taxable
[-] key
Preset Amount: 1.00
HALO: 4 digits
Tax Status: Non-taxable
Key Operation:
Control Lock: SET, Enter 38 and depress the [#/NS] key.
[0] [1] [#/NS] ([+] key)
[5] [0] [AT/TL] (Preset Amount)
[3] [AT/TL] (HALO digit)
[0] [0] [AT/TL] (Tax Status (Non-taxable))
[0] [2] [#/NS] ([-] key)
[1] [0] [0] [AT/TL] (Preset Amount)
[4] [AT/TL] (HALO digit)
[0] [0] [AT/TL] (Tax Status (Non-taxable))
[#/NS] (To complete this submode.)
4.20 Manager Pass Code Programming (Submode 39)
Manager Pass Code in Z mode or SET mode can be programmed here, which restricts the access to
Z, and SET modes only for a manager.
Anytime outside a sale
Control Lock: SET
39 [#/NS] |Mode Code
| [#/NS] |Pass Code| [AT/TL] [#/NS]
NOTE: If you enter “0000”, the ECR is released from Pass Code System.
Example) To program the following Manager Pass Codes.
Pass Code in Z mode: 0101
Pass Code in SET mode: 0202
Key Operation:
Control Lock: SET, Enter 39 and depress the [#/NS] key.
[0] [1] [#/NS] (Z mode)
[0] [1] [0] [1] [AT/TL] (Pass Code)
[0] [2] [#/NS] (SET mode)
[0] [2] [0] [2] [AT/TL] (Pass Code)
[#/NS] (To complete this submode.)
OPERATION
CONDITION
2 digits (01 or 02)
01:
Z
mode
02:
SET
mode
4 digits
(0000 to 9999)
(See
NOTE
below.)
Repeat for the other Pass Code.