8. INSTALLING AND REPLACING THE RECEIPT AND JOURNAL ROLLS
EO1-11149
8.1 Installing/Replacing the Receipt Roll
8- 1
8. INSTALLING AND REPLACING THE RECEIPT AND
JOURNAL ROLLS
WARNING!
Care must be taken not to injure yourself with the paper cutter.
Turn the control lock to the
REG
position using a Mode Selector Key to perform the paper roll
installation described in this chapter.
8.1 Installing/Replacing the Receipt Roll
1. To remove the Printer Cover, insert the Printer Cover
Key to the Printer Cover Lock, and then turn it 90
°
clockwise.
2. When replacing the receipt, cut the paper at the
arrow indicating position in the figure on the left.
Press down the
[RF]
key to take away the cut paper.
CAUTION: Never try to pull out the remaining paper
end by hand. It may cause a paper jam
.
3. Cut the new paper roll’s paper end straight to make it
sharp.
4. Place the paper roll into the left holder as viewed
from the front of the machine so that the paper end
will be fed from the bottom.