Filter
Top Products
102
Configuring the Recorder
In order to access the recorder remotely, the recorder Server must be setup to
allow remote connections.
Time Out Value
Specifies a value (in seconds) to wait for a signal from the Surveillix Remote
Client. If a signal is not received by that time, the connection is dropped.
Center Port
Used to transfer the connection data.
Image Port
Used to transfer the image data.
Search Port
Used to transfer the search data.
Configuring the Server for Remote Connection
1. From the Display screen, click Setup.
2. Click Network.
3. Ensure that Disable Remote Control is cleared.
Note If you are using a Firewall, it may be necessary to adjust the port settings on both the recorder and the Firewall. Contact the
Network Administrator for more information.
4. Click Apply.
Note If no additional user accounts have been created the administrator account will be the only account that can connect to the
recorder remotely.
5. The recorder server is now ready to receive incoming connections from Remote Software, SCS, or MDVR.