Filter
Top Products
31472AB 27
Installing the Inner Rail Extensions
Each rackmount kit includes a set of inner rails in two sections: inner rails and inner rail extensions. The inner rails are pre-attached to the
chassis, and do not interfere with normal use of the chassis if you decide not to use a server rack. The inner rail extension is attached to
the inner rail to mount the chassis in the rack.
1. Place the inner rail extensions on the side of the chassis aligning the hooks of the chassis with the rail extension holes.
Make sure the extension faces "outward" just like the pre-attached inner rail.
2. Slide the extension toward the front of
the chassis.
3. Optional: Secure the chassis with 2
screws as illustrated. (4 screws are
provided on 4U models.)
4. Repeat steps for the other inner rail
extension.
Installing the Outer Rack Rails
Outer rails attach to the rack and hold the
chassis in place. The outer rails will extend
between 30 inches and 33 inches.
1. Secure the back end of the outer rail
to the rack, using the leaf springs
and screws provided.
2. Press the button where the two
outer rails are joined to retract the
smaller outer rail.
3. Hang the hooks of the rails onto the
rack holes and if desired, use
screws to secure the front of the outer rail onto the rack.
4. Repeat steps for the other outer rail extension.
Installing the Recorder into a Rack
1. Extend the outer rails.
2. Align the inner rails with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping pressure
even on both sides. When pushed all the way into the
rack, the rails will click into a locked position (preventing
removal without pressing the quick-release tabs).