Filter
Top Products
4.15 Top Cover 4 Replacement Procedures
4.15 Top Cover
Removing the Cover
To remove the top cover, first remove the battery pack, HDD, expansion memory module,
ODD, modem, wireless LAN unit, keyboard, strip cover, and display assembly, as described
in the preceding sections. Follow the steps below to remove the top cover.
1. Turn the computer upside down and remove the following 19 screws from the rear panel:
• M2.5x4: seven screws
• M2.5x8: eleven screws
• M2.5x3: one screw
Figure 4-42 Removing the top cover (back panel screws)
2. Turn the computer over again and detach the two speaker cables, system fan cable, touch
pad FFC cable, fingerprint unit FFC cable, and the Bluetooth cable from the top cover.
Satellite P200
/ P205
Series Maintenance Manual
[CONFIDENTIAL]
4-39