Filter
Top Products
4.15 Top Cover 4 Replacement Procedures
Satellite P200
/ P205
Series Maintenance Manual
[CONFIDENTIAL]
4-41
Installing the Top Cover
To install the top cover, follow the steps below and refer to the figures in the preceding
section.
1. Seat the top cover, and secure the speaker cables, Bluetooth cable, fingerprint unit FFC
cable, and touch pad unit FFC cable to the system board.
2. Secure the top cover with two M2.5x6 screws, four M2.5x8 screws, and one M2.5x20
screw.
3. Turn the computer upside down and secure eleven M2.5x8 screws, seven M2.5x4 screws,
and one M2.5x3 screw.