Filter
Top Products
User’s Manual 7-5
HW Setup and Passwords
If there are 2 HDDs, the Boot Priority Options setting will be like the
following.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
This procedure does not affect the settings.
*
In this computer, CD-ROM refers to the DVD Super Multi (+-R DL) drive,
HD DVD-ROM drive or HD DVD-RW drive.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. Use the up/down cursor keys to select boot device you want and
press ENTER.
U Selects the USB diskette drive.
N Selects the network.
1 Selects the primary HDD.
2
Selects the secondary HDD.
C Selects the CD-ROM*.
ExpressCard HDD boot is not supported.
■ If a supervisor password is set, the menu above does not appear when
you use the user password to start the computer.
■ The selection method above does not change the boot priority settings
in HW Setup.
■ If you press a key other than one of those above or if the selected
device is not installed, the system will boot according to the current
setting in HW Setup.