Filter
Top Products
Users Manual 6-13
Power and Power-up Modes
2. Enter the Password.
3. Press Enter.
The computer has three power-up modes:
Hibernation (saves data in memory to the hard disk)
Sleep (power remains on, maintaining the data in memory, but the CPU
and all other devices effectively enter a 'sleep' mode)
Boot (does not save data in memory)
You can configure various settings associated with both Sleep Mode and
Hibernation Mode within the Power Options (to access it, click Start
Control Panel System and Security Power Options).
You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter
Hibernation Mode - please refer to Chapter 5, The Keyboard for further
details.
You can set up your computer so that power is turned off automatically
when you close the display panel, and turned on again when you open it.
Please note that this function is only available for Sleep Mode or
Hibernation Mode, not for Shut Down Mode.
This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in sleep mode or hibernation mode.
If you enter the password incorrectly three consecutive times, the
computer shuts down. You must turn on the computer again and re-enter
the password.
Refer also to the section Turning off the power in Chapter 3, Getting
Started.
If the panel power off function is enabled and you manually shut down
Windows, do not close the computer's display panel until the shut down
process has been completed.