Filter
Top Products
-
TOSHIEA
6F9Eoo9o
6.3 Setting the
ResDonse
delay
time
Adjust the set
tile
according to the
ourgose
of detection (I.e.
overcurrent or undercurrent). The set tire for the
resoonse
delay varies ger
aDDllcation.
Host applications
cay
not need
any delay
tile.
It is
aainly
used to prevent nuisance
trioging
(ride through) by ignoring
aoeentary
load
gliches.
7.
Ooerational
lest
(1)
Check both the control and detection circuits to confirm there
is no
eis-wiring.
(2) Check if the current
dedtction
tiae
delay, and
resgonse
tiae
delay settings are correct.
(3)
If the wiring ard settings are correct, energize the control
circuit and check if it is the
erooer
voltage.
-13-