Filter
Top Products
TOSHIBA
6F9E0090
(6) If the relay does not operate in the above test, check if
the current setting is correct or if the
ingut
signal is
above the set detection value.
If the
ingut
signal is
correct, check the operation of the relay by gradually
reducing the setting of the current adjusting knob.
If the
relay still does not
ooerate.
it is defective.
In this case,
please contact the dealer
froa
which you purchased the relay
or Toshiba.
Power Source
-
Detected current
Overcurrent
detect ion
-
Undercurrant
I-/
T3
detect ion
I
Tl:
Detection delay tire
T2: Overcurrent detecting resgonse delay
tiler
T3: Undercurrent detecting resgonse delay
tlaer
Fig.
!i
Relay Operation
-
16-