Filter
Top Products
4 Replacement Procedures Error! Style not defined. Error! Style not defined.
Disassembling the ODD Drive
NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or
replace the ODD drive only if it fails.
Disassemble the ODD drive according to the following procedures and Figure 4.12.
1. Remove two M2×2.5 screws.
2. Remove the bracket.
M2X2.52
Figure 4
.
12 Removing the bracket from the ODD drive
Assembling the ODD Drive
Assemble the ODD drive according to the following procedures.
1. Seat the bracket in the correct position.
2. Secure them with two M2×2.5 screws.
Satellite A350D Maintenance Manual 4-22