Filter
Top Products
4 Replacement Procedures Error! Style not defined. Error! Style not defined.
Installing CPU and Thermal Module
Install the CPU and Thermal Module according to the following procedures.
1. Check the cam is in the unlock position.
2. Seat the CPU on the socket, using care not to damage the pins. Align the CPU with the
CPU socket by using the triangle as a guide.
3. Rotate the cam clockwise to the lock position with a flat-blade screwdriver.
CAUTION:
When installing the thermal module, keep the following in mind:
1. Be sure to confirm the correct position for the module.
2. Secure the relevant screws on the motherboard according to the number sequence
sealed on the thermal module.
4. Reapply Shinetsu 7762 grease on the CPU thermal module as shown in Figure 4.33. If
you use one new CPU thermal module, remove the release papers on the thermal pads
first.
Figure 4
.
33 Reapply the Shinetsu 7726 grease on the thermal module and remove the release
papers
5. Install the thermal module into the correct position in the laptop.
Satellite A350D Maintenance Manual 4-46