Filter
Top Products
4.4 Switch Cover and Hotkey board 4 Replacement Procedures
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual 4-23
4.4 Switch Cover and Hotkey Board
Removing the Switcher
Remove the switch cover and hotkey board according to the following procedures and Figures 4-
13, 4-14.
1. Open the display panel.
2. Release the following 11 latches on the switch cover, in that order:
- Six bottom latches
- One latch on the left and right sides
- Three front latches
3. Remove the switch cover.
4. Disconnect the SUMI-card (flat cable) from CN2001 on hotkey board.
Latch
Figure 4-13 Removing the switch cover screw
5. Remove the two M2.5 x4 black flat-head screws for securing the hotkey board.
6. Remove the hotkey board.