Filter
Top Products
4.7 Display Assembly 4 Replacement Procedures
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual 4-31
Figure 4-20 Removing the display assembly
Installing the Display Assembly
Install the display assembly according to the following procedures and Figures 4-19, 4-20.
1. Place the display panel in the correct position and push the wireless antenna cable into the
hole.
2. Connect the LCD/FL cable to CN13 on the system board and fix it with one M2x3 white
flat-head screw.
3. Securing display assembly with four M2.5x5 black flat-head screws.
4. Close the display panel and turn the computer upside down and fix it with two M2.5x20
black bind screws.
5. Push the wireless LAN cable through the core and place the core in the correct position.