Filter
Top Products
4.13 North Bridge Thermal Module 4 Replacement Procedures
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual 4-45
4.13 North Bridge thermal module and MDC cable
Removing North Bridge thermal module and MDC cable
Remove the North Bridge thermal module according to the following procedures and Figure 4-30,
4-31.
1. Disconnect the cable of the North Bridge thermal module from CN15 on the system board.
2. Turn the system board upside down.
3. Remove two M2x3 black bind screws and washers.
4. Remove North Bridge thermal module.
5. Remove the black sheet.
6. Remove one M2.5x2.5 white bind screws.
7. Removing the CD tray.
North bridge thermal module
M2x3 black bind screw
M2.5x2.5 white band screw
CD tray
System board
Black sheet
Washer
Figure 4 -30 Removing the North Bridge thermal module