Filter
Top Products
User’s Manual 6-9
Power and Power-Up Modes
Retaining data with power off
When you turn off your computer with fully charged batteries, the batteries
retain data for the following approximate time periods.
Extending battery life
To maximize the life of your battery pack:
■ At least once a month, disconnect the computer from a power source
and operate it on battery power until the battery pack fully discharges.
Before doing so, follow the steps below.
1. Turn off the computer's power.
2. Disconnect the AC adaptor and turn on the computer's power. If it
does not turn on, go to step 4.
3. Operate the computer on battery power for five minutes. If the battery
pack has at least five minutes of operating time, continue operating
until the battery pack is fully discharged. If the Battery indicator
flashes or there is some other warning to indicate a low battery, go to
step 4.
4. Connect the AC adaptor to the computer and the power cord to a
power outlet. The Battery indicator should glow orange to indicate
that the battery pack is being charged. If the Battery indicator does
not glow, power is not being supplied. Check the connections of the
AC adaptor and power cord.
5. Charge the battery pack until the Battery indicator glows blue.
■ If you have extra battery packs, rotate their use.
■ If you will not be using the system for an extended period, more than
one month, remove the battery pack.
■ Store spare battery packs in a cool dry place out of direct sunlight.
Battery pack
(6-cell, 12-cell)
Approximately 2 days
(Sleep mode, 6-cell)
Approximately 3.5 days
(Sleep mode, 12-cell)
Approximately 1 month
(Shut down mode, all type of battery
packs)
RTC battery Approximately 1 month