286
9.BLINKING GRAPHIC SYMBOLS
5.Jam Symbols (Cont.)
9
10
Close the cover of the Bridge Unit.
Releasing a paper misfeed in the Finisher and the Hole Punch Unit
(optional: MJ-1024/1023, MJ-6004)
9
Close the cover of the Hole Punch Unit.
11
Close the upper tray.
• Place both hands at the shaded area of the upper tray, and then
push and close the upper tray until it locks.
1
Hold up the guide and remove any mis-
fed paper in the paper exit area.
• When the Hole Punch Unit (optional: MJ-6004) is installed, pro-
ceed to step 2. If not installed, proceed to step 6.