Filter
Top Products
E-58
1
2
3
Replacing the Lamp Cartridge
Preparations: Tur ning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to
replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.
1
Unplug the power cord.
2
Turn the projector upside-down.
3
Remove the lamp cover.
(1)Turn the lamp cover’s set screw counterclockwise
and loosen until the screw turns freely. (The screw
does not come off.)
4
Remove the lamp cartridge.
(1)Fully loosen the lamp cartridge’s two screws. (The
screws do not come off.)
(2)Grasp the lamp cartridge’s handle and pull upward
to remove the lamp cartridge.
(2)Open the lamp cover a little, then pull it in the direc-
tion of the arrow and remove it.