Filter
Top Products
Overview24
English
Connecting to a computer
• Signals are outputted from Monitor OUT terminal even in standby mode. From
AUDIO OUT terminal, no audio signal is outputted.
• Many laptops do not turn on their external video ports when connected to a
projector. Usually a key combination like FN + F5 or CRT/LCD key turns the
external display on/off. Locate a function key labeled CRT/LCD or a function key
with a monitor symbol on the laptop. Press FN and the labeled function key
simultaneously. Refer to your laptop’s documentation to learn your laptop’s key
combination.
• Audio out terminal accepts a stereo connector but signal is monaural.
• The output volume from the Audio out terminal can be adjusted by the volume
buttons.
Connecting to a Component Video device
The projector is capable of accepting a Component Video signal. Use a
Component Video-VGA (Mini D-sub) cable to display these images.
The following standards are supported in the digital TV function:
VGA cable
Audio cable
VGA cable
Audio cable
• 480i • 480p
• 576i • 576p
• 720p (50/ 60 Hz) • 1080i (50/ 60 Hz)
AV equipment
Component Video cable