Filter
Top Products
Additional Information40
English
Indicator lights
The front of the projector has three lights that indicate its status. Check the
following for information about the indicator lights. If an abnormal condition is
indicated, turn off the projector and contact your dealer.
When the projector is in a normal state:
When the projector is in an abnormal state:
POWER TEMP LAMP State Remark
Orange Off Off
Standby mode ---
Flashing
Green
Off Off
The projector is powering
up.
Cannot turn off the
projector.
Green Off Off
The projector is under
normal operation.
---
Flashing
Orange
Off Off
The projector needs to cool
down for 90 seconds after
the power is turned off.
Cannot turn on the
projector.
POWER TEMP LAMP State Remark
Off Off Red
The lamp has exceeded its
usage life.
Solution:
• Install a new lamp.
Red Red Off
The internal temperature is
too high.
• The intake ventilation or
the exhaust ventilation is
blocked.
• The projector may be in a
poorly ventilated location.
• The ambient temperature
may be too high.
The fans are not working.
Solution:
• Make sure the ventilation
holes are not blocked.
• Relocate the projector.
• Stop using the projector
until the ambient
temperature falls within
the specified range. The
maximum operating
temperature is specified
as 35°C (95°F).
• Make sure the power
supply is stable.
• Check if there is an
obeject stuck in the fans.
• Contact your dealer.
Red Red Green
Red Red Red
Off Red Off
Off Red Green
Green Red Off
Green Red Green